The parts are in the final development stage and we’ll just need to make sure all goes
as planned before being made available to the public.

Sound like fun?

We’ll give you a free product and pay the cost of installation at a professional facility.

Fine print:

● Clutch must be installed by an ASE or state certified technician in a professional automotive repair
facility of the vehicle owner’s choice

● An EXEDY representative must be present to oversee installation and to perform a test drive
of the vehicle after clutch is fitted

● The installation appointment must be made with at least  2 weeks lead time to accommodate
travel time of EXEDY Technical rep

● Must follow factory service manual for installation procedures and fastener torque values

● The vehicle’s flywheel must be serviced or replaced according to the factory service manual
repair information if a replacement flywheel is not supplied with the clutch kit

● The clutch kit will include pressure plate assembly, clutch disc assembly, pilot
bearing/bushing, release bearing and flywheel if applicable

● Installation time will be paid according to Alldata® labor times

● EXEDY will pay 100% labor and shop fees for the installation of the prototype clutch kit.
A quote MUST be submitted for approval to EXEDY Globalparts Corporation

● The prototype clutch kit will be covered under a warranty (12 month / 20,000 mile -
whichever comes first) against manufactured defects and workmanship

Check back often as we add new applications!

EXEDY is currently seeking:

2009-11  Dodge Challenger w/ 6 Speed

2012-13  Chevy Camaro ZL1 w/ LSA engine, TR6060 trans

View Product Release Flyer

The 34th Annual NMRA Ford Expo, held over Labor Day weekend at National Trail Raceway, is always one of the most exciting stops on the NMRA Keystone Automotive Ford Nationals series tour. As the second-to-last race, with points battles almost at critical mass, NMRA racers had the wick turned up giving the track all it can take, and then some. And in addition to our usual racers, there was also vintage Blue Oval cars making their way down the track in the Y-Block Shootouts, ’57 Ford Gathering & Shootout and special vintage bracket classes. For the fans of both old and new, this was the NMRA event of the year.  Despite a very poor weather forecast, the NMRA was able to complete the event in 2 days and avoid a Sunday rainout.

NMRA All-Ford Drag Racing:

Along with the challenge of the desert heat, a new track configuration was added to the event at the Las Vegas Motor Speedway giving an extra challenge for the drivers to adjust to the new course. But Vaughn quickly adapted during practice and was able keep his high-qualifying streak alive by placing 5th out of over 40 drivers.

On Saturday Vaughn defeated Dave Briggs during the top 32 rounds to make his way to the Sweet Sixteen main event. After a short half-time break and spending some time chatting with fans, taking pictures, and signing autographs, Vaughn was ready to rock in the main event that kicked off with an amazing opening ceremony of colorful fireworks lighting up the Las Vegas sky.

Vaughn’s Ford Mustang proved victorious after battling Luke Lonberger in a Chevrolet Corvette in the top 16, and then Conrad Grunewald in a Chevrolet Camaro in the top 8, solidifying the dominant American muscle car for the night. Vaughn would move into the final four to find himself faced with the event’s 1st place qualifier, Fredric Aasbo.

Both Vaughn and Fredric held nothing back in their runs as they fought to get an automatic place atop the coveted podium. They judges deemed the battle too close to call and issued a “One More Time” battle.

After one more extremely intense and close battle between the two drivers, Aasbo was declared the winner, and Vaughn would go on to defeat Robbie Nishida in the consolation round, taking 3rd place overall at Round Six.

“I sure do like that top step of the podium better than this shorter one, but I am pumped to be up here regardless,” says Vaughn Gittin Jr. “We were pretty flawless as a team for the third event in a row. We extended our overall points lead and I am really excited going into Irwindale and my incredible team and I will be doing everything possible to earn that top step and bring home another Championship! Thanks to all of my supporters; you all are amazing!”

New “How to install” videos will be added frequently so check back again to see more.